Dell OptiPlex 160 (Late 2008) - Manual (Page 5)

5. If applicable, remove the computer stand (see Removing the Computer Stand ).
6. Remove the computer cover (see Removing the Computer Cover ).
After Working on Your Computer
After you complete any replacement procedures, ensure you connect any external devices, cards, cables, etc. before turning on your computer.
1. Replace the computer cover (see Replacing the Computer Cover ).
2. Replace the computer stand (see Replacing the Computer Stand ).
3. Connect a network cable to your computer, if necessary.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
Back to Contents Page
WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer