Dell PowerEdge Rack Enclosure 4820 - Manual (Page 6)

Cabling the Dell™ PowerEdge™ R610
Page 4
Figure 3: Routing the Cables through the CMA
3. If the cable bundle includes a KVM dongle, place the dongle inside the CMA basket. If the KVM dongle will not
fit inside the basket with the other cables, attach the dongle to the exterior of the front basket using the hook
and loop straps on the CMA basket as shown in Figure 4.
Figure 4: Attaching the KVM Dongle to the CMA Basket
KVM Dongle
hook and loop straps
Cables entering CMA should
have a small amount of slack to
avoid cable strain when CMA is
extended.
NOTE: Do not store excess cable
slack inside the CMA. The cable may
protrude through the CMA causing
binding and potentially damaging the
cable.