Dell M109S Projector - Manual (Page 21)

Using Your Projector
21
K EYSTONE — Adjusts the image distortion caused by tilting the projector.
M ENU P OSITION — Allows you to select the position of the OSD menu on the screen.
M ENU T RANSPARENCY — Select to change the transparency level of the OSD background.
M ENU T IMEOUT — Allows you to adjust the time for an OSD Timeout. By default, the
OSD disappears after 30 seconds of non-activity.
M ENU L OCK — Select On to enable Menu Lock and hide the OSD menu. Select Off to
disable the Menu Lock and display the OSD menu.
NOTE:
If the OSD disappears while you disable Menu Lock, press the Menu button
on the control panel for 15 seconds, then disable the function.
P ASSWORD — When Password Protect is enabled, a Password Protect screen requesting
you to enter a password will be displayed when the power plug is inserted into the
electrical outlet and the power for the projector is first turned on. By default, this
function is disabled. You can enable this feature using the Password menu. This
password security feature will be activated the next time you turn on the projector. If
you enable this feature, you will be asked to enter the projector's password after you
turn on the projector:
1 1st time password input request:
a Go to Setup menu, press Enter and then select Password to Enable the password
setting.
b Enable the Password function will pop up a character screen, key in a 4-digit number
from the screen and press the Enter button.
c To confirm, enter the password again.
d If the password verification is successful, you may resume with accessing the
projector's functions and its utilities.