Dell PowerVault DL2100 User Manual
Page 4

For the DL2000 - Powered by CommVault ® Advanced Deduplication
Edition, the following general guidelines were used to configure
deduplication for the primary storage policy copies:
• Specified the magnetic library mount paths for the
deduplication database (referred to as the deduplication
store in the Simpana Interface).
• Set the block level deduplication factor to 64K for storage
policies that backup file data and to 128K for storage policies
that backup databases
• Configured software compression and deduplication on all
subclients associated with these storage policies
• Applied the Spill and Fill mount path allocation policy to the
DL2000 magnetic library
• Confirmed that the Deduplication Performance Pack was
installed on the DL2000
Refer to the “Configuring Deduplication for High Performance”
whitepaper available on http://www.dell.com/dl2000 for additional
information.
For the DL2000 - Powered by CommVault ® Standard Edition, default
settings were used for all backups. Refer to CommVault Books Online
for additional information.