Dell Precision T1700 (Mid 2013) - Manual (Page 40)

Option Description
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer .
Client Address Method Specifies how the client obtains the IP address.
• Static IP
• DHCP (enabled by default)
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer .
Client IP Address Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP .
Client SubnetMask Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP .
Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enabled with ImageServer and when Client DHCP is
set to Static IP .
Advanced Specifies for Advanced debugging
• Verbose Mode (this option is disabled by default)
NOTE: This Option is only relevant when the integrated NIC control in the System
Configuration group is set to enable with Cloud Desktop.
Table 12. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For
laptops, ensure that your computer battery is fully charged and connected to a power outlet
1. Restart the computer.
2. Go to dell.com/support.
3. If you have your computer's Service Tag or Express Service Code:
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect Service Tag. Proceed with the instructions on screen.
40