Dell DR4000 - Manual (Page 12)

12 Setting Up the Dell™ DR Series System as a CIFS Backup Target on EMC Networker | February 2014
4. Select the Reconnect at logon checkbox.
5. When prompted, enter the CIFS credential to authenticate on the Active Directory domain.
The DR Series system container is now mounted to your backup server.
6. If Client Direct will be used, make sure all of the clients can access the same DR container share
using this path. Otherwise separate Client Direct Paths will need to be filled in with the actual
paths that clients use to access the DR container share (please refer to step 10 in the next section
Set up Networker)
Note: On DR4x00 systems, the maximum supported CIFS connections per appliance is 32; on the
DR6000 system the maximum is 64. Therefore, there should not be more than 32 and 64 corresponding
clients connected/mapped to a single DR Series system for backup at the same time. For details, see the
Dell DR Series System Interoperability Guide .