Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 11)

Disk Quotas for “Administrator” Do Not Display in
the NAS Manager
===============================================================
To create a disk quota for the user administrator you must access the Disk Quota tool by
using a KVM or though the Terminal Services Client.
===============================================================
NAS Manager Status Indicator Loses Posted Events
After System Shutdown or Reboot
===============================================================
The NAS Manager status indicator loses posted events after performing a system shutdown
or reboot. However, the events are still logged in the system’s event log.
===============================================================
===============================================================
Limitation of Cluster support for optional Storage Manager software
===============================================================
Storage Manager software is not supported on clustered Dell™ PowerVault™ NAS systems.
Information in this document is subject to change without
notice.
(C) 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written
permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: "Dell," "PowerEdge," "PowerVault," and
"Dell OpenManage" are trademarks of Dell Inc.;
"Microsoft" and "Windows" are registered trademarks of Microsoft
Corporation; "Novell" and "NetWare" are registered trademarks
of Novell, Inc.; "Intel" is a registered trademark of Intel Corporation;
"InnoculateIT" is a trademark and "Computer Associates" is a
registered trademark of Computer Associates International, Inc.;
"UNIX" is a registered trademark of The Open Group in the United
States and other countries.
Other trademarks and trade names may be used in this document
to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other
than its own.
July 2004