Dell Vostro V131 (Mid 2011) - Manual (Page 69)

Installing The DC-In Port
1. Replace the DC-in port into its compartment.
2. Tighten the single screw to secure the DC-in port in place.
3. Connect the DC-in cable to the system board.
4. Install the
display assembly .
5. Install the Wireless Wide Area Network (WWAN) card .
6. Install the Wireless Local Area Network (WLAN) card .
7. Install the palm rest .
8. Install the memory .
9. Install the hard drive .
10. Install the keyboard .
11. Install the base cover .
12. Install the Secure Digital (SD) card .
13. Install the Subscriber Identity Module (SIM) card .
14. Install the battery .
15. Follow the procedures in After Working Inside Your Computer .
69