Crestron electronic DigitalMedia Room Controller DM-RMC-100 User Manual
Page 18
DigitalMedia™ Room Controller, CAT
Crestron DM-RMC-100
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
3
VIDEO LED
(1) Red/green dual color LED,
indicates video signal presence
and lock status:
Red – indicates no video
Green – indicates the device is
receiving video
Blinking Red/Green –
indicates errors in the video
stream
4
CNTRL LED
(1) Red/green dual color LED,
indicates Ethernet connection
and control system
communication status:
Red – indicates no Ethernet
link
Green – indicates Ethernet link
and connection to control
system
Blinking Red/Green –
indicates Ethernet link but no
connection to control system
Blinking Green - The LED
goes out momentarily every
time a control command is sent
or received (i.e. IR, RS-232,
Relay, Sens)
5
SETUP (LED and
Button)
(1) Red LED and (1) miniature
recessed push button, for
Ethernet auto-discovery and
default IP address
(Continued on following page)
14
• Room Controller, CAT: DM-RMC-100
Operations & Installation Guide – DOC. 6743-1F