beautypg.com

Room monitoring, Fcc wants you to know – ClearSounds Photo50 V608 User Manual

Page 12

background image

12 – ENGLISH

13 – ENGLISH

40 seconds, you will hear a tone. Press any key to continue.

room Monitoring

This remote access feature enables you to call your home and turn ON

the answering machine’s microphone function, allowing you to monitor

sounds in the room where the answering machine is situated.

turning the answering machine on from a

remote location

The answering machine can be activated using the remote control

functions.
1 Call up the answering machine. After approximately 10 rings, the

machine will answer and emit a long tone.

2 Enter the remote code, printed underneath the unit. If the code is

accepted, you will hear two short beeps.

3 Press 9#. Two beeps confirms that the answering machine is now

on. replace the handset.

out of Memory

The total capacity of the answering machine’s memory is

approximately 14 minutes.
The memory space is shared between the outgoing message,

personal memos, and regular incoming messages.
When the memory is full the display will show FL, the answering

machine will answer after 10 rings to allow remote playback and

deletion of messages, no new messages will be accepted until the
existing messages have been played and erased.

fcc WantS YoU to KnoW

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. On the bottom of this equipment

is a label that contains, among other information, a product identifier

in the format US: AAAEQ##TXXXX. If requested, this number must

be provided to the telephone company. an applicable certification

jacks Universal Service Order Codes (USOC) for the equipment is

provided (i.e., RJ11C) in the packaging with each piece of approved

terminal equipment
The REN is useful to determine the quantity of devices you may

connect to your telephone line and still have all of those devices ring

when your telephone number is called. In most, but not all areas,

the sum of the rEN’s of all devices connected to one line should not

exceed five (5.0). To be certain of the number of devices you may

Photo50-TriLingual.indd 12

7/6/08 11:11:12 AM