Requirements, Specifications, Configuration – Lenovo USB 2.0 CD-RW/DVD-ROM Combo II Drive User Manual
Page 17: Self, Power, Adapter)
Configuration
1:
self
power
(AC
adapter)
configuration
The
Combo
II
Drive
is
usually
used
with
the
self
power
(AC
adapter)
configuration.
Requirements
v
Standard
USB
cable
(shipped
with
this
option);
Part
Number
40Y8704
v
AC
adapter
(shipped
with
this
option)
Specifications
Reading
DVD
media
and
reading
and
writing
CD
media
are
supported.
Connecting
the
Combo
II
Drive
using
configuration
1
Attention:
If
you
are
booting
from
the
USB
2.0
CD-RW/DVD-ROM
Combo
II
drive,
then
the
AC
power
adapter
should
be
attached
to
the
USB
2.0
CD-RW/DVD-ROM
Combo
II
drive
prior
to
booting.
To
connect
the
Combo
II
Drive
to
your
system,
complete
the
following
procedure.
Refer
to
during
installation.
1.
Turn
on
your
computer.
2.
Insert
the
cable
plug
1
into
the
USB
connector
of
the
drive.
3.
Plug
the
standard
USB
connector
2
into
the
USB
port
of
your
computer.
4.
Connect
the
AC
adapter
to
the
DC
IN
connector 3
on
the
Combo
II
Drive.
Figure
1-1.
Configuration
1:
self
power
(AC
adapter)
configuration
Chapter
1.
Combo
II
Drive
quick
install
1-3