Cabletron Systems 9T427-16 - Manual (Page 12)

9T425-16, 9T427-16, and 9T428-16 Module Specific Information
10
C-PORT MODE (9T428-16) (Read-only)
Displays one of the following choices:
¥ STN/RI - The port is operating as a station device or an
802.5-compatible Ring In port.
¥ LOBE - The port is operating as a lobe port.
¥ TPIM - The port is operating as a Cabletron Þber optic RI/RO port, compatible
with TPIM-F2, TRFOT-2 (in RI/RO application), or TDRMIM conÞgured for
Cabletron Þber optic keying.
RING STATE (Read-only)
Displays the current condition of the token ring. Valid conditions include:
¥ Beaconing
¥ Closed
¥ Contention
¥ Normal
¥ Purge
¥ Unknown
RING SPEED (Read-only)
Displays the token ringÕs operating speed (either 4 Mbps or 16 Mbps).
RING NUMBER (Read-only)
IdentiÞes the source route ring number assigned to this ring.
ACTIVE MONITOR ADDRESS (Read-only)
Displays the MAC Address of the station that currently is designated as the
Active Monitor.
ACTIVE MONITOR CHANGES (Read-only)
Displays the number of times that the Active Monitor has changed from one
station to another since the module was powered up.
STATIONS ACTIVE (Read-only)
Displays the number of active stations on this token ring segment.