Cabletron Systems HSIM-W87 - Manual (Page 39)

Network Tools
HSIM-W87 User’s Guide 4-13
4.2.3 Special Commands
done, quit, exit:
Syntax: done
quit
exit
Description: The done, exit, or quit command enables the user to exit
from Network Tools and return to the Main Menu screen.
All three commands perform the same function.
Options: Not Applicable
Example:
TIP
To find the MIB II interface indexes assigned to the ds1
channels used in the IMUX group, utilize the dsx1 and
ds1alarm commands. With the dsx1 command, the interface
numbers are in the column under “line” in the display. When the
ds1alarm command is used, the interface numbers, as well as
the HSIM ID and the ds1 index, can be seen for verification.
-> done
051472