Cabletron Systems HSIM-W87 - Manual (Page 34)

Chapter 4: Management
4-8 HSIM-W87 User’s Guide
command: wanpq
Syntax: wanpq
wanpq -ea
wanpq -da
wanpq -aip
wanpq -dip
Description: WAN IP Priority Queuing is used to prioritize IP packets
from a specified IP address. - The
Internet Protocol (IP) address being added to or removed
from the Wide Area Network Priority Queue database.
Options: wanpq (with no options) displays information on the
status of the WAN priority queue.
-ea enables the WAN Priority Queue Application.
-da disables the WAN Priority Queue Application.
-aip Adds the IP address designated by
IPADDRESS to the WAN Priority Queue database.
-dip Deletes the IP address designated by
IPADDRESS from the WAN Priority Queue database.
Example:
-> wanpq
2689_1
#
#WAN Priority Queue Status: Disabled
#
#Maximum number of address entries: 16
#
#Current number of address entries programmed: 0
#
-> wanpq -ea
#
# WAN Priority Queue Application enabled.
->