Dell POWERVAULT MD3600I User Manual
Page 6
4
Getting Started With Your System
•
If multiple NICs are installed on a host, it is recommeded that you use
different subnets for management and iSCSI data links.
•
Before connecting any cables between the host server and storage array,
physically label each port and connector.
•
Always follow proper power-up and power-down procedures when cycling
power across the network. You must also ensure that critical network
components are on separate power circuits.
NOTE:
The illustrations in this document show cabling for only one PowerVault
MD3600i series storage array in a SAN environment. The illustrations also show only
the default IP addresses for the PowerVault MD3600i series storage array. To cable more
than one PowerVault MD3600i series storage array in a SAN environment,
see the Deployment Guide.