Transceiver / remote control programming – Crimestopper Security Products SP-500 User Manual

Page 16

Text mode
Original mode

TRANSCEIVER / REMOTE CONTROL PROGRAMMING

Note: All transmitter codes must be learned at time of programming!! The SP-500 learns up to 4
different transmitter codes.

1. Turn key to the ON position. (Pink wire must be connected.)
2. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.
3. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting

for a 2

code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting

for the 3

code and so on. If all 4 codes are learned, the unit will automatically exit code learning mode,

otherwise turn key off. See diagram below.

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

FLASH 2, 3, or 4 X's

IGN

OFF

COMPLETE

PRESS LOCK