Crimestopper Security Products SP-500 - Manual (Page 10)

10
REMO
REMOTE ENGINE CONTROL
TE ENGINE CONTROL
Remote Start & Auxiliary Output – Button Press Selection (Option # 8):
To eliminate the possibility of accidentally opening the trunk or starting the vehicle, there are (3) options for
button press selection. This option will allow you to change whether the Remote starter and Trunk release
activate by a:
4. Double button ½ second presses.
5. Single ½ second press.
6. Press and Hold 2 seconds.
*Default = Single ½ second press*
REMOTE ENGINE STARTING - SUCCESSFUL START
1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation.
(Chirps can be programmed on or off-See installation manual.)
2) Parking lights flash once, then turn on solid, Ignition/Accessory circuits turn on.
3) After a few seconds, Starter Motor engages, Parking lights and Accessory circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Accessory turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can
be turned off with remote transmitter.
REMOTE ENGINE STARTING – LCD PAGER-REMOTE:
When requesting a remote start the LCD pager remote will confirm with an Ignition Icon along with 3 beeps.
Once the vehicle has successfully started the remote will confirm back with 1 vibration, a moving vehicle Icon,
and 6 beeps.
AFTER
IGN
3
STARTER
THEN
FLASH 1X
SOLID
SOLID
SEC.
PRESS START