Clarion DRZ 9255 - Manual (Page 8)

DRZ9255
11
English
10
DRZ9255
English 6. OPERATIONS
Basic Operations
Note:Be sure to read this chapter referring to the front diagrams of
chapter “3. CONTROLS” on page 5 (unfold).
CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [FUNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [FUNC] button for 1
second or longer to turn off the power for the
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHK” and “Push POWER”
appear in the display alternately, so press the
[FUNC] button. The system check starts within
the unit. When the system check is complete,
press the [FUNC] button again.
Selecting a mode
1. Press the [FUNC] button to change the
operation mode.
2. Each time you press the [FUNC] button, the
operation mode changes in the following
order:
Radio mode ➜CD mode ➜ CD changer
mode ➜ DVD changer mode ➜ TV mode ➜
AUX mode ➜ Radio mode...
∗ External equipment not connected with
CeNET is not displayed.
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise
decreases the volume.
∗ The volume level is from ---- (minimum) to +6dB
(maximum).
∗ Holding down the [ROTARY] knob switches the
volume from 1dB steps to 0.5dB steps.
Mute the sound
To mute the volume during playback, press the
[ROTARY] knob.
Switching the display
Press the [DISP] button to select the desired
display.
Each time you press the [DISP] button, the
display switches in the following order:
∗ Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
Main display
Sub display
Clock display
Main display
[FNC]
[BND]
[MUTE]
[PS/AS]
[ADJ]
[A-M]
[ ]
[DISP]
[SCN]
[1]
[RPT]
[2]
[RDM]
[3]
[DISC]
[4][6]
[5]
[ ][ ][ ][ ]
[ ] , [ ]
[ ] , [ ]
Functions of Remote Control Unit Buttons
Mode
Button
Radio CD
CD changer
DVD changer
TV
Switches among radio, CD, CD changer, DVD changer, TV and AUX.
Switches reception
band. Plays the first track.
Top play. Moves the next disc in
increasing order. Switches reception
band.
Increases and decreases volume (in all modes).
Tunes in the desired
station.
No function.
Moves tracks up and down.
When pressed and held for 1 second:
Fast-forward/fast-backward.
Switches between playback and pause.
Tunes in the desired
TV station.
Switches between TV
and VTR.
Turns mute on and off. Holding down the button for about one second changes the volume from 1dB
steps to 0.5dB steps.
Adjusts the tone, the balance, and the fader.
When pressed and held for 1 second: Display off.
Switches among main display, sub display, clock display.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
Preset scan.
When pressed and
held for 2 seconds:
Auto store.
Enters the adjust
mode.
Select items in the Adjust mode.
Scan play.
Repeat play.
Random play.
No function.
No function.
Scan play.
Enters the adjust
mode.
When pressed and
held for 1 second:
Title scroll.
Scan play.
When pressed and
held for 1 second:
Disc scan play.
Repeat play.
When pressed and
held for 1 second:
Disc repeat play.
Random play.
When pressed and
held for 1 second:
Disc random play.
[4]:Disk down.
[6]:Disk up.
No function.
Scan play.
Enters the adjust
mode.
When pressed and
held for 1 second:
Title scroll.
(This function is only
for CD changer.)
Preset scan.
When pressed and
held for 2 seconds:
Auto store.
Enters the adjust
mode.
Recalls the station in
the memory.
When pressed and
held for 1 second:
Manual memory. Recalls the station in
the memory.
When pressed
and held for 1 second:
Manual memory.