Contec SPI-8451-LVA - Manual (Page 83)

8. BIOS Setup
76
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
Using Setup
In general, you use the arrow keys to highlight items, press to select, use the PageUp and
PageDown keys to change entries, press for help and press to quit. The following table
provides more detail about how to navigate in the Setup program using the keyboard.
Table 8.1. Using Setup
Key Function
Up Arrow Move to the previous item
Down Arrow Move to the next item
Left Arrow Move to the item on the left (menu bar)
Right Arrow Move to the item on the right (menu bar)
Esc
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher level menu
Move Enter Move to the item you desired
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ key Increase the numeric value or make changes
- key Decrease the numeric value or make changes
Esc key
Main Menu -- Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu -- Exit current page and
return to Main Menu
F1 key General help on Setup navigation keys
F5 key Load previous values from CMOS
F6 key Load the fail-safe defaults from BIOS default table
F7 key Load the optimized defaults
F10 key Save all the CMOS changes and exit
Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press or the F1 key again.
In Case of Problems
If, after making and saving system changes with Setup, you discover that your computer no longer is able
to boot, the AwardBIOS™ supports an override to the CMOS settings which resets your system to its
defaults.
The best advice is to only alter settings which you thoroughly understand. To this end, we strongly
recommend that you avoid making any changes to the chipset defaults. These defaults have been
carefully chosen by both Award and your systems manufacturer to provide the absolute maximum
performance and reliability. Even a seemingly small change to the chipset setup has the potential for
causing you to use the override.
A Final Note About Setup
The information in this chapter is subject to change without notice.