Contec SPI-8451-LVA - Manual (Page 100)

8. BIOS Setup
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
93
Description Choice
Onboard FDC Controller
Select Enabled if your system has a floppy disk
controller (FDC) installed on the system board and
you wish to use it. If you install and-in FDC or the
system has no floppy drive, select Disabled in this
field.
Onboard Serial Port 1
Select an address and corresponding interrupt for the
first serial port.
Onboard Serial Port 2
Select an address and corresponding interrupt for the
second serial port.
Onboard Parallel Port
Select a logical LPT port name and matching address
for the physical parallel (printer) port
Parallel Port Mode
Selected an operating mode for the onboard parallel
port. Select Compatible or extended unless you are
certain both your hardware and software support EPP
or ECP mode.