Adjusting the projected image, Adjusting the projector height – Compaq MP3800 User Manual
Page 19
Using the Projector
Compaq iPAQ Microportable Projector MP3800 User’s Guide
2–9
Adjusting the Projected Image
There are three ways to adjust the projected image:
■
Adjusting the projector height
■
Adjusting the image size
■
Adjusting the projector focus
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the
projector approximately 1 inch (2.54 cm).
Ä
CAUTION:
If the projector is mounted to a tripod, do not use the
elevator foot.
To adjust the height:
1. Raise the projector to the desired display angle, then press the
elevator button 1 to release the elevator foot 2.
281124-001.book Page 9 Tuesday, April 30, 2002 10:00 AM