Compaq MP3800 - Manual (Page 18)

2–8 Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Projector
Powering Off the Projector
1. Press the Power/Standby button 1 to turn off the
projector lamp.
The message “Going to Standby” displays and the LED on
the
Power/Standby button blinks amber. Allow the projector to
cool down.
Ä
CAUTION: Wait until you see a steady amber LED (approximately
45 seconds) before turning the projector back on. Failure to follow this
caution can result in damage to the projector.
2. Once the Power/Standby LED has turned steady amber,
disconnect the power cord from the electrical outlet and the
projector 2.
281124-001.book Page 8 Tuesday, April 30, 2002 10:00 AM