Compaq MP3800 - Manual (Page 14)

2–4 Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Projector
Connecting the Projector to a Desktop Computer
1. Connect one end of the projector signal cable into the back of
the projector and the other end to the DVI connector 1A or
the VGA connector 1B on the desktop computer and tighten
the screws.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord 2 into the back of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
281124-001.book Page 4 Tuesday, April 30, 2002 10:00 AM