Other functions – Clarion VRX610 User Manual

Page 16

VRX610

Other Functions

Clock Adjustment

1. Press the ADJ button

to display the ad-

justment selection display.

2. Move the JOYSTICK

up or down to select

CLOCK, then press ENT at the center of the
JOYSTICK

to display the clock adjustment

display.

3. Move the JOYSTICK

left or right to select

HR or MIN, then move the JOYSTICK

or down to adjust the time.

∗

The time is displayed in 12-hour format.

4. Pressing ENT at the center of the JOYSTICK

when the cursor is above HR or MIN saves

the adjusted value in memory and simulta-
neously returns the display to the previous
display (adjustment selection display).

To cancel clock adjustment before completion,
use the JOYSTICK

to move the cursor to

MENU, then press ENT at the center of the
JOYSTICK

Triggered audio mute for cellular
telepones

This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.

∗

This function is not compatible wiht all cellular

telepones Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.

Other Functions

Always turning on the button
illumination on the operation panel

Note:
• The following operation is enabled when the panel

is open.

The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.

●

“ON”: Button illumination on the operation

panel turns on for 5 seconds;

●

“OFF” : Button illumination is always on when

the power is turned on;

1. When the panel is open, press the ADJ button

to show the adjustment selection display.

2. Operate the JOYSTICK

upward or down-

ward and select “AUTO ILL” to show “ON”
and “OFF” in the menu bar.

3. Operate the JOYSTICK

rightward or left-

ward to select either position to be set and
press the ENT at the center of the JOYSTICK

for setting.

4. Press the ADJ button

to return to the pre-

vious mode.

∗

To set “ON” again, switch “OFF” to “ON” manually.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed. The numbers of titles that
can be entered for each mode are as follows.

∗

You cannot enter titles with the unit in Seek, Pre-
set Scan, Auto store (TUNER, TV), Scan, Repeat
or Random (CD changer, MD changer) mode. Can-
cel each of those operations before entering titles.

1. Press the FUNC button

to select the mode

you want to enter a title (CD changer or TV).

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to
enter the title.

3. If you press and hold the TITLE button

(

for

1 second or longer, the display switches to
the title input mode display.

4. Operate the JOYSTICK

upward or down-

ward, rightward or leftward and move the cur-
sor to the character to be entered. Press the
ENT at the center of the JOYSTICK

∗

When the cursor is at the lower/upper limit of

the display, operate the JOYSTICK

upward

or downward, the character string of the follow-
ing line appears.
“-->” :

Space

“<--” :

Backspace

“--I--” :

Centering

5. Repeat the step 4 to enter the complete title.

6. Press and hold the ENT at the center of the

JOYSTICK

for 2 seconds or longer to store

the title into memory and cancel title input mode.

Title list play

You can display a list of titles, then select the disc
or broadcast station to listen to from that list.

∗

You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner or TV), Scan, Re-
peat or Random (CD changer or MD changer)
mode. Cancel those operation modes before to
display a title list.

1. With the unit in radio, CD/MD changer, TV,

press the TITLE button

(

. A title list is dis-

played. The following functions can be car-
ried out in a title list display.

●

TUNER: A title of a channel stored in the

presets 1 to 6 or a channel number is dis-
played.

●

CD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, ”---------” is displayed.

●

TV: A title of a channel stored in the pre-

sets 1 to 6 or a channel number is displayed.

2. Operate the JOYSTICK

upward or down-

ward to select one of the items 1 to 6. Press
ENT at the center of the JOYSTICK

to re-

produce the selected broadcast station or
disc.

∗

In case of 12-CD changer, move the cursor to
disc 6 and then operate the JOYSTICK

downward to change over to a list display of
discs 7 to 12.

3. Press the TITLE button

(

again to return to

the STANDARD display.

Mode

Number of titles

Radio mode

30 titles

TV mode

15 titles

CD changer mode

Number of titles

CDC655z connected

60 titles

CDC655Tz connected

100 titles

CDC1255z connected

50 titles