Concord Camera JD C3.1z3 - Manual (Page 8)

7
ENU
CHECKING THE BATTERY POWER LEVEL
The battery power level indicator represents the level of power of the batteries. The meaning of each icon is as
follows:
Note:
• The camera’s battery level indicator may not accurately reflect the actual power condition of the
rechargeable batteries, even if they have been fully recharged. This is an inherent problem with
rechargeable batteries, which is not related to the performance of the camera. For better performance,
Ni-MH rechargeable batteries are recommended.
• Be sure to remove the batteries if the camera will not be used for an extended period of time to prevent
corrosion or battery leakage.
TURNING THE LCD/ICONS ON OR OFF
The camera is featured with a 1.5”LCD that is highly convenient for framing subjects during image/video capture,
reviewing stored images/video clips, and for on-screen display of the camera’s current settings.
Press the ( ) button repeatedly to toggle between the different LCD modes.
Note:
• To save battery power, it is recommended to turn off the LCD display.
• After one minute of inactivity, the LCD will automatically power off. When the LCD is auto-powered off,
the flash LED blinks. Press any button to resume the LCD.
• In ( ) Review Mode, only the LCD icons can be turned on or off.
Icons off
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
N
A
AWB
4 M 28/45
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
GETTING STARTED
Batteries are fully
charged.
Battery power is
not full, but it is still
sufficient for camera
operations.
Battery power is
running low. Prepare
a fresh set of
batteries.
Battery power is low.
Replace or recharge
(rechargeable
batteries only) as soon
as possible.
Batteries are flat.
Replace them
immediately.
LCD off LCD on with icons