Setting the flash – Concord Camera JD C3.1z3 User Manual
Page 13
12
ENU
SETTING THE FLASH
To set the flash:
Press / repeatedly until the desired indicator appears on the LCD.
Flash Mode
Description
Auto Flash (Default)
The camera judges if a flash is required. If the environment is too dark,
the flash will fire.
Auto + Red-Eye
Use this mode to reduce the occurrence of “red-eyes” when taking pictures
with a flash. The camera will automatically detect when the flash is needed
and the flash will fire after a short delay.
Flash ON
Flash will fire in any lighting condition. The “red-eye” reduction function also
included in this mode.
Flash OFF
In this mode, the flash will not fire, regardless of the lighting condition. Use
this mode to capture the mood of ambient lighting. This mode is also useful
for places that prohibit flash photography, such as museums, aquarium,
archeological exhibitions, etc.
• To prevent blurry pictures in dim-lighting environment, hold the camera
steady when pressing the Shutter button or mount the camera on a tripod.
Note:
• The flash needs to recharge after it is fired. If the Shutter button is pressed when the flash is
charging, the Flash Ready LED will blink. Wait for a short while, then press the Shutter button again to
take a picture.
• Some of the scene selection will deactivate the flash setting. For more information, refer to p. 20.
A
TAKING A PICTURE
A
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
3
M
28/45
A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
fig. 1.1
fig. 1.2
fig. 1.3
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
AWB
3
M
28/45
5
10
30
2