Concord Camera JD C3.1z3 - Manual (Page 10)

9
ENU
A
AWB
4 M 28/45
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
SETTING THE CAMERA’S OPERATIONAL MODES
The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.
To change the camera operational mode, slide the mode switch horizontally to the corresponding position.
TAKING PICTURES
LIVE VIEW THROUGH THE VIEWFINDER
1. Turn the camera on.
2. Set it to ( ) Camera Mode.
(To save battery power, press the ( ) button to turn off the LCD display).
3. Aim the camera at the subject, then look through the Viewfinder to frame the desired object(s) to be included
in the photo. (fig.1.1)
Note: For better results, stand at least 2 ft (0.6m) away from the subject.
4. Press and hold the Shutter button halfway down to activate the Auto-Focus function until the green AF LED
stops blinking and the AF frame on the LCD changes to green. (fig.1.2)
(The camera will automatically determine the best focus, and a rapid click can be heard.)
5. Hold the camera steady with both hands, then firmly press the Shutter button down fully to capture the
image. (fig.1.3)
• When the image is captured, a beep can be heard.
• After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate
that the image is being stored.
Camera Mode
For taking pictures or
customizing your camera
settings for picture taking.
Review Mode
For browsing images and
video clips, deleting images
and video clips, playing
a slide show, transferring
images and/or video clips
from the internal memory
to the SD card, or rotating
images.
Video Mode
For recording video clips or
customizing camera settings
for video-clip recording.
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
4 M 28/45
A
AWB
GETTING STARTED / TAKING A PICTURE
fig.1.1 fig.1.2 fig.1.3
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB