Dell PowerEdge R900 - Manual (Page 6)

6
Information Update
E1A18 PDB Ctrl
Cable
PDB control cable is
missing, loose, or faulty. Reseat the cable. If problem
persists, replace the cable.
See "Getting Help" in your
Hardware Owner’s Manual.
E1118 CPU Temp
Interface
Processor has exceeded
acceptable temperature
and has been disabled
to prevent damage. See "Troubleshooting
System Cooling" in your
Hardware Owner’s Manual.
E1716 Chipset The BIOS has
determined that there
is a problem with the
chipset, but is unable
to determine its origin. See "Getting Help" in your
Hardware Owner’s Manual.
E1717 IERR CPU is faulty. Applicable
only for BIOS 1.1.9 and
BMC 2.27 and later. Replace the CPU.
See "Troubleshooting
Processors" in your
Hardware
Owner’s Manual.
E1914 DRAC5 Conn
2 Cbl
DRAC5 cable is missing,
loose, or faulty. Reseat the cable. If problem
persists, replace the cable.
See "Getting Help" in your
Hardware Owner’s Manual.
E2122 Fatal Mem
Reset
System memory failed. See "Troubleshooting
System Memory" in your
Hardware Owner’s Manual.
I1915 Video Off Local video is disabled. Information only.
I1916 Video Off
in XX
Remote disabling of
local video currently
in process. Information only.
NOTE:
For the full name of an abbreviation or acronym used in this table, see "Glossary"
in your Hardware Owner’s Manual.
Table 1. LCD Status Messages (continued)
Code Test Causes Corrective Actions