Dell PowerVault 221S (SCSI) - Manual (Page 9)

Rack-to-Tower Conversion Guide 1-7
Installing the Tower Front Panel
1 Position the tower front panel in place on the system chassis, using care to install the
five light pipes in their holes in the front panel.
NOTE: In the next step, start all 14 T-10 Torx screws in their holes before tightening any of the
screws to ensure proper alignment.
2 Install the tower front panel on the chassis, securing it with the 14 T-10 Torx screws
that you removed in step 2 of the last procedure, “Removing the Front Panel.”
F i g u r e 1 - 3 . I n s t a l l i n g t h e To w e r F r o n t P a n e l
screws (14)
light pipes (5)
2H982bk1.book Page 7 Monday, November 5, 2001 10:12 AM