Abbingdon Music Research PH-77 Reference Class User Manual
Page 21
21
If there are any
questions, please
contact your nearest
AMR distributor/
dealer
5.1 Special System Setup Menu
From the factory presets, with the input switch (R3) set to Direct, the selection of EQ curves (Stereo) is the default
/
setting.
However, with the input switch (R3) set to Normal, it is possible to make switching between the selection of EQ
curves OR multiple inputs as the default
/
setting.
A flowchart of the menu to select the default setting is shown below.
To enter this special system setup menu, press and HOLD the Menu button
on the front panel (F3) for 5
seconds.
Using the
/
buttons (F2), select “Equalisation” or “Input” as the default and then press the
button on the
front panel (F3) or on the remote control (RC6) to accept.
From now on, whenever this input is used, the selection of EQ curves (or multiple inputs if selected) is the default.
With multiple sources,
for ease, make switch-
ing between inputs the
default selection
Section 5 - Special System Setup