Canon 4.1 User Manual
Page 63
63
Problem:
No free disk space message displays when you start a scan
➤
Solution:
Since there is insufficient free space on your hard drive, clear non-
essential files to create more space.
Problem:
Scanning is taking a long time
➤
Solution:
Resolution is set too high. Lower the resolution to the minimum
required settings and rescan.
Problem:
Can’t scan with the film adapter unit
➤
Solution:
Set the film guide correctly on the document glass (platen). See the
user guide for the film adapter unit.
Problem:
Colors in the Preview area are strange
➤
Solution 1: The original is faded. Try retouching the colors with an image editing
program. (image editing program manual)
➤
Solution 2: Color balance and brightness are incorrectly set. Reset them.
➤
Solution 3: The fluorescent lamp inside the scanner is not sufficiently warmed.
Please wait for a minute or two, then perform a preview scan again.
➤
Solution 4: Calibration slot on the film guide is obstructed. Clear any items or
dust blocking the calibration slot. See the user guide for the film
adapter unit.
Problem:
Entire image is whited out (or blackened) when the image
type is set to black and white
➤
Solution:
The threshold value is set too low (or high). Increase (decrease) the
threshold value.