Canon 4.1 - Manual (Page 20)

20
S T E P 1
To Set the Magnification Factor
Set the desired magnification factor on the control panel.
Hint
The Relationship Between Data Volume and Scanning Resolution
The higher the magnification and scanning resolution settings, the greater
the file size of scanned images. There are certain inconveniences associated
with large data volumes, such as longer processing times and the risk of
running out of memory resources. You are advised against setting the
resolution higher than necessary. For example, if you scan an A4 (21.0 x 29.7
cm (8.3 x 11.7 in.)) size image in the color mode, the amount of data varies
according to the resolution.
Slider
Drag the slider bar in either
direction or use the arrow
keys to change the resolution.
Click here to return the
magnification factor to 100%. Click inside these boxes
to enter values directly.
Click the up or down arrow to
increase or decrease the
setting.
A4 color image
1.6MB
75dpi
6.3MB
150dpi
408MB
1200dpi
102MB
600dpi
25.5MB
300dpi
* These numbers are approximate and may differ from actual scan results.