Chauvet 300E - Manual (Page 14)

Setup
-10- Legend 300E Spot User Manual Rev. 01g
Mounting Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes (page 2 of this manual).
Orientation Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation.
Make sure to mount this fixture away from any flammable material as indicated in the
Safety Notes (page 2 of this manual).
Rigging CHAUVET® recommends following the general guidelines below when mounting the
Legend 300E Spot.
· When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
· Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
· If hanging this fixture, make sure that the location where you are mounting the
fixture can support its weight. Please see the Technical Specifications section of this
manual for the weight requirement of this fixture.
Procedure
The Legend 300E Spot comes with an already installed mounting bracket to which you
will be able to attach the two included omega clamps. Be aware that you will have to use
two mounting points per fixture. In addition, you will have to use a safety cable (not
included) to link the fixture to the structure.
Product Mounting
Diagram