Dodge 2015 Journey - Uconnect 8.4/8.4N Manual - Manual (Page 95)

Custom POIs (Points of Interest)
NOTE: Custom POI files must be named “poi.gpi”. and
located on the USB storage device in a folder named
‘POI’ within a folder named “Garmin” (Garmin/POI/).
You can manually load custom points of interest (POI)
databases, available from various companies on the In-
ternet. Some custom POI databases contain alert infor-
mation for points such as safety cameras and school
zones. The navigation system can notify you when you
approach one of these points. You are responsible for
ensuring that your use of safety camera information is
lawful in your area.
CAUTION
Garmin and Chrysler Group LLC are not responsible for
the consequences of using custom POI databases, or for
the accuracy of custom POI databases.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto a USB mass
storage device. Use the USB mass storage device to
load the POIs. The POI Loader is available at
www.garmin.com/products/poiloader. Refer to the
POI Loader Help file for more information; click Help
to open the Help file. The file name can only be POI.gpi.
No other file name or extension should be used.
NOTE:
Each time you load custom POIs to the naviga-
tion system, any other custom POIs already saved in the
system will be overwritten.
Finding Custom PoIs
You can view a list of the custom POIs loaded in your
navigation system.
• Press Where To? > Extras > Custom POIs.
94 NAVIGATION (8.4N ONLY)