beautypg.com

Heated seats, Front heated seats – Dodge 2015 Grand_Caravan - User Guide User Manual

Page 27

background image

To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Press and release the S (SET) button on the memory switch, then within five seconds

press and release the 1 or 2 button accordingly.

4. Press and release the LOCK button on the RKE transmitter within 10 seconds.
• To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on

the programmed RKE transmitter.

CAUTION!

Do not place any article under a power seat or impede its ability to move as it may cause
damage to the seat controls. Seat travel may become limited if movement is stopped
by an obstruction in the seat’s path.

WARNING!

• Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of

the seat could cause you to lose control. The seat belt might not be properly
adjusted, and you could be severely injured or killed. Only adjust a seat while the
vehicle is parked.

• Do not ride with the seatback reclined so that the seat belt is no longer resting

against your chest. In a collision, you could slide under the seat belt and be severely
injured or killed. Use the recliner only when the vehicle is parked.

HEATED SEATS

Front Heated Seats

The controls for front heated seats are lo-
cated on the center instrument panel area.
• Press the switch once to select High-

level heating. Press the switch a second
time to select Low-level heating. Press
the switch a third time to shut the heat-
ing elements Off.

If the High-level setting is selected, the
system will automatically switch to Low-
level after approximately 60 minutes. The
Low-level setting will turn Off automatically
after approximately 45 minutes.

Heated Seat Switch Location

G E T T I N G S T A R T E D

25