Dodge 2015 Grand_Caravan - User Guide - Manual (Page 26)

FRONT SEATS
Power Seat
The power seat switch controls forward/back, up/down, and tilt adjustment.
The recline switch, located on the outboard side of the seat, controls seatback adjustment.
Power Lumbar
• Push the switch forward to increase the
lumbar support. Push the switch rear-
ward to decrease the lumbar support.
Memory Seat
The memory seat feature allows you to save
two different driver seating positions, driv-
er's outside mirror, adjustable brake and
accelerator pedals, and radio station preset
settings. The memory seat buttons are lo-
cated on the driver's door panel.
To set a memory position:
1. Cycle the vehicles ignition to the ON
position.
2. Adjust all memory profile settings.
3. Press and release the S (SET) button.
4. Press and release the 1 or 2 button
within five seconds.
NOTE:
Before programming your RKE transmitters you must select the select “RKE Linked to
Memory” in the Electronic Vehicle Information Center (EVIC). Refer to “Programmable
Features” in “Electronics” for further information.
Power Seat Switches
1 — Lower Seat Switch
2 — Recline Switch
3 — Power Lumbar Switch
Memory Seat Button Location
G E T T I N G S T A R T E D
24