beautypg.com

To vary the speed setting – Dodge 2015 Challenger-SRT - Owner Manual User Manual

Page 178

background image

Once a speed has been set a message (CRUISE CON-

TROL SET TO MPH/KM) will appear indicating what

speed was set. This light will turn on when the electronic

speed control is SET.
To Vary The Speed Setting
To Increase Speed

When the Normal (Fixed Speed) Electronic Speed Con-

trol is set, you can increase speed by pressing the SET +

button.
The drivers preferred units can be selected through the

instrument panel settings if equipped. Refer to “Under-

standing Your Instrument Panel” for more information.

The speed increment shown is dependant on the speed of

U.S. (mph) or Metric (km/h) units:

U.S. Speed (mph)

• Pressing the SET + button once will result in a 1 mph

increase in set speed. Each subsequent tap of the

button results in an increase of 1 mph.

• If the button is continually pressed, the set speed will

continue to increase in 5 mph increments until the

button is released. The increase in set speed is reflected

in the DID display.

Metric Speed (km/h)

• Pressing the SET + button once will result in a 1 km/h

increase in set speed. Each subsequent tap of the

button results in an increase of 1 km/h.

• If the button is continually pressed, the set speed will

continue to increase in 10 km/h increments until the

button is released. The increase in set speed is reflected

in the DID display.

176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE