beautypg.com

Dodge 2014 Challenger - Owner Manual User Manual

Page 372

background image

If the ignition switch is cycled, this sequence will repeat,

providing the system fault still exists. If the system fault

no longer exists, the “TPM Telltale Light” will no longer

flash, and the ЉSERVICE TPM SYSTEMЉ message will no

longer display, and a pressure value will display in place

of the dashes. A system fault can occur due to any of the

following:
1. Signal interference due to electronic devices or driving

next to facilities emitting the same radio frequencies as

the TPM sensors.

2. Installing aftermarket window tinting that contains

materials that may block radio wave signals.

3. Accumulation of snow or ice around the wheels or

wheel housings.

4. Using tire chains on the vehicle.
5. Using wheels/tires not equipped with TPM sensors.

Tire Pressure Monitor Display

370 STARTING AND OPERATING