beautypg.com

Am/fm button, Set/rnd button — to set the pushbutton memory – Dodge 2014 Challenger - Owner Manual User Manual

Page 245

background image

Push the rotary TUNE/SCROLL control knob a third

time and TREBLE will display. Turn the TUNE/SCROLL

control knob to the right or left to increase or decrease the

treble tones.
Push the rotary TUNE/SCROLL control knob a fourth

time and BALANCE will display. Turn the TUNE/

SCROLL control knob to the right or left to adjust the

sound level from the right or left side speakers.
Push the rotary TUNE/SCROLL control knob a fifth time

and FADE will display. Turn the TUNE/SCROLL control

knob to the left or right to adjust the sound level between

the front and rear speakers.
Push the rotary TUNE/SCROLL control knob again to

exit setting tone, balance, and fade.

AM/FM Button
Press the buttons to select either AM or FM mode.
SET/RND Button — To Set The Pushbutton
Memory
When you are receiving a station that you wish to

commit to pushbutton memory, press the SET/RND

button. The symbol SET 1 will now show in the display

window. Select the button (1 to 6) you wish to lock onto

this station and press and release that button. If a button

is not selected within five seconds after pressing the

SET/RND button, the station will continue to play but

will not be stored into pushbutton memory.
You may add a second station to each pushbutton by

repeating the above procedure with this exception: Press

the SET/RND button twice and SET 2 will show in the

display window. Each button can be set for SET 1 and

SET 2 in both AM and FM. This allows a total of 12 AM

4

UNDERSTANDING YOUR INSTRUMENT PANEL 243