Change the language, Set the time – Ram Trucks MEDIA CENTER 730N for Jeep User Manual
Page 28
Change the Language
The navigation radio will conform to the vehicle lan-
guage set in the Electronic Vehicle Information Center
(EVIC), if equipped.
If you change the language in the navigation radio, the
system will change the language for all display informa-
tion.
To change the language with the navigation radio:
1. Press the MENU hard-key on the right side of the
radio.
2. Press the System Setup soft-key to get to the System
Setup menu.
3. Press the Language soft-key and select a language.
Set the Time
1. Press the Time Display soft-key in the lower left corner
of the screen.
14
MEDIA CENTER 730N (RHR)
This manual is related to the following products: