beautypg.com

Dodge 2011 Charger - Owner Manual User Manual

Page 33

background image

Automatic Door Locks Programming —
If Equipped
The Automatic Door Locks feature can be enabled or
disabled as follows:

• For vehicles equipped with Uconnect Touch™, refer to

“Uconnect Touch™ Settings” in “Understanding Your
Instrument Panel” for further information.

• For vehicles not equipped with the Uconnect Touch™,

perform the following procedure:

1. Close all doors and place the key in the ignition
switch.

2. Within 15 seconds, cycle the ignition switch between
LOCK and ON/RUN and then back to LOCK four times
ending up in the LOCK position (do not start the engine).

3. Within 30 seconds, press the power door LOCK switch
to lock the doors.

4. A single chime will indicate the completion of the
programming.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

• If you do not hear the chime it means that the system

did not enter the programming mode and you will
need to repeat the procedure.

• Use the Automatic Door Locks feature in accordance

with local laws.

Automatic Unlock Doors On Exit
The doors will unlock automatically on vehicles with
power door locks if:

1. The Automatic Unlock Doors On Exit feature is en-
abled.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

31

This manual is related to the following products: