beautypg.com

Compass display – Dodge 2011 Challenger - Owner Manual User Manual

Page 199

background image

• Video Surround
• Audio Surround
While in the Surround Sound menu, press the SELECT

button to change surround modes. The Video Surround

Mode will only be available for video media sources

(DVDs, Video CDs, or other video media supported by

the radio).

Compass Display

The compass readings indicate the direction

the vehicle is facing. Press and release the

MENU button until “Compass” displays in the

EVIC. Press SELECT to display one of eight

compass readings and the outside temperature.

NOTE:

The system will display the last known outside

temperature when starting the vehicle and may need to

be driven several minutes before the updated tempera-

ture is displayed. Engine temperature can also affect the

displayed temperature; therefore, temperature readings

are not updated when the vehicle is not moving.
Automatic Compass Calibration
This compass is self-calibrating, which eliminates the

need to set the compass manually. When the vehicle is

new, the compass may appear erratic and the EVIC will

display “CAL” until the compass is calibrated. You may

also calibrate the compass by completing one or more 360

degree turns (in an area free from large metal or metallic

objects) until the “CAL” message displayed in the EVIC

turns off. The compass will now function normally.
Manual Compass Calibration
If the compass appears erratic and the “CAL” message

does not appear in the EVIC display, you must put the

compass into the Calibration Mode manually as follows:
1. Turn the ignition switch ON.

MENU

Button

4

UNDERSTANDING YOUR INSTRUMENT PANEL 197