Dodge 2011 Challenger - Owner Manual User Manual

Page 158

This can usually be found where the hanging antenna

wire is attached to the garage door opener motor (it is

NOT the button normally used to open and close the

door).

6. Firmly press and release the LEARN or TRAINING

button. The name and color of the button may vary by

manufacturer.
NOTE:

You have 30 seconds in which to initiate the next

step after the LEARN button has been pressed.
7. Return to the vehicle and press the programmed

HomeLink௡ button twice (holding the button for two

seconds each time). If the device is plugged in and

activates, programming is complete.
If the device does not activate, press the button a third

time (for two seconds) to complete the training.
If you have any problems, or require assistance, please

call toll-free 1–800–355–3515 or, on the Internet at

www.HomeLink.com for information or assistance.
To program the remaining two HomeLink௡ buttons,

repeat each step for each remaining button. DO NOT

erase the channels.

1 — Garage Door Opener

2 — Training Button

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE