Fluids and capacities, Maintaining your vehicle – Dodge 2010 Viper - User Guide User Manual
Page 63
![background image](/manuals/603176/63/background.png)
FLUIDS AND CAPACITIES
Component
Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant
MOPAR
®
Antifreeze/
Coolant Five
Year/100,000 Mile Formula
HOAT (Hybrid Organic
Additive Technology) or
equivalent.
16 Quarts (15 Liters).
Includes heater and
coolant recovery bottle
filled to the MAX level.
Engine Oil with Filter
For best performance and
maximum protection under
all types of operating
conditions, the
manufacturer only
recommends full synthetic
engine oils that meet the
requirements of Chrysler
Material Standard
MS-10725 and are
approved to MB 229.3 or
MB 229.5. The
manufacturer recommends
the use of a full synthetic
5W-40 or equivalent engine
oil.
11 Quarts (10.4 Liters)
Fuel Selection
Premium Unleaded
91 Octane or higher
16 Gallons (60.6 Liters)
Engine Oil Filter
MOPAR
®
Engine Oil Filter or
equivalent.
—
Spark Plugs
RE10PMC5 (Gap 0.050 in
[1.27 mm])
—
Transmission
MOPAR
®
ATF+4
®
Automatic
Transmission fluid or
equivalent licensed ATF+4
®
product.
—
Rear Axle
MOPAR
®
Synthetic Gear
and Axle Lubricant SAE
75W-140 or equivalent, with
Limited Slip Additive
Friction Modifier.
—
Brake Master Cylinder
MOPAR
®
Brake and Clutch
Fluid DOT 4 Motor Vehicle
or equivalent.
—
Power Steering Reservoir
MOPAR
®
Power Steering
Fluid +4 or MOPAR
®
ATF+4
®
Automatic Transmission
Fluid or equivalent licensed
ATF+4
®
product.
—
61
MAINTAINING YOUR VEHICLE