Chrysler Uconnect for Jeep - Manual (Page 67)

3. Touch the 1 or 2 soft-key and then touch either AUX 1
or AUX 2 in the VES column (depending which AUX
input the gaming console is plugged into). To exit touch
the back arrow soft-key at the top left of the screen. Listen to an Audio Source while a video is
playing
Ensure the Remote Control and Headphone switch are on
the same channel. If watching a video on Screen 1
(second row), then Channel 2 could be used for audio. If
watching a video on Screen 2 (third row), then Channel 1
could be used for audio.
Using the Remote Control
1. Press the MODE button on the Remote Control and
either the Mode Select Screen will display or a small
banner will appear at the bottom of the screen.
2. To listen to an audio source on Channel 1 or 2, either
press Up/Down/Left/Right on the Remote Control to
highlight the desired audio source or press the MODE
button repeatedly until the desired audio source appears
on the screen.
Select Channel/Screen 1 and AUX 1 in the VES column.
66 Uconnect™ Multimedia - Video Entertainment System (VES)™