Dodge 2010 Viper - Owner Manual - Manual (Page 263)

10. Reinstall the three bulb and socket assemblies into
the upper lamp assembly, and turn them clockwise.
11. Reinstall the upper lamp assembly and the three
retaining nuts.
12. Install the access panel and the two fasteners.
13. Close the trunk.
License Lamp
1. Open the trunk.
2. Turn the bulb and socket assembly counterclockwise,
and then pull it out of the housing.
3. Pull the bulb out of the socket assembly.
4. Push the replacement bulb into the socket assembly.
5. Reinstall the bulb and socket assembly into the hous-
ing, and then turn it clockwise.
6. Close the trunk.
7
MAINTAINING YOUR VEHICLE 259