beautypg.com

Taillamp, tail/stop lamp, rear marker lamp – Dodge 2010 Viper - Owner Manual User Manual

Page 258

background image

2. Turn the bulb and socket assembly counterclockwise,
and then pull it out of the front fog lamp assembly.

3. Pull the bulb out of the socket assembly.

4. Push the replacement bulb into the socket assembly.

5. Reinstall the bulb and socket assembly into the front
fog lamp assembly, and then turn it clockwise.

6. Install the splash shield and push pin.

Taillamp, Tail/Stop Lamp, Rear Marker Lamp

1. Open the trunk

2. Remove the two fasteners and then remove the access
panel.

254

MAINTAINING YOUR VEHICLE