Christie Digital Systems 38-VIV003-01 - Manual (Page 9)

9
PREPARATION
POSITIONING PROJECTOR
● This projector is designed to project on a flat projection surface.
● The projector can be focused from 5.3’(1.6m) ~ 40.0’(12.2m).
● Refer to the figure below to adjust screen size.
Screen Size
(W x H) mm
Height (H1)
40”
Height (H2)
812.8 x 609.6
21.6”(548.64mm)
2.4”(60.96mm)
100”
2032 x 1524
54”(1371.6mm)
6”(152.4mm)
150”
3048 x 2286
81”(2057.4mm)
9”(228.6mm)
200”
4064 x 3048
108”(2743.2mm)
12”(304.8mm)
300”
6096 x 4572
162”(4114.8mm)
18”(457.2mm)
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted to 15.6
degrees.
Lift the front of the projector and pull FEET LOCK LATCHES
on both sides of the projector. 1
ADJUSTABLE FEET
FEET LOCK
LATCHES
40”
100”
150”
200”
300”
230”
153”
115”
77”
31”
H1
H2
40.0’ (12.2m)
26.6’ (8.1m)
20.0’ (6.1m)
13.1’ (4.0m)
5.3’ (1.6m)
Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to fine tune position and tilt. 2
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull to undo FEET LOCK LATCHES.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.) 3
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
CAUTION
Avoid positioning a projector with an angle of more than 20
degrees. Projection Lamp may malfunction.
31”
629.9 x 472.4
16.7”(425.16mm)
1.9”(47.24mm)