Christie Digital Systems 38-VIV003-01 - Manual (Page 20)

20
Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE
button again or press any other button except the POINT, SELECT, RIGHTCLICK, P-TIMER and LASER buttons.
PICTURE FREEZE FUNCTION
KEYSTONE ADJUSTMENT
1 Press KEYSTONE
▲/▼ button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
2 Correct keystone distortion by pressing KEYSTONE ▲/▼ button
or POINT UP/DOWN button(s). Press KEYSTONE
▲ button or
POINT UP button to reduce the upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce the
lower part.
Reduce the upper width with KEYSTONE ▲ button
or POINT UP button.
Reduce the lower width with KEYSTONE ▼ button
or POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press ZOOM button on Top Control or ZOOM ▲/▼ button on
Remote Control Unit. The message “Zoom” is displayed.
2 Press ZOOM ▲ button or POINT UP button to make image
larger, and press ZOOM ▼ button or POINT DOWN button to
make image smaller.
1 Press FOCUS button on Top Control or FOCUS ▲/▼ button on
Remote Control Unit. The message “Focus” is displayed.
2 Adjust focus of image by pressing FOCUS ▲/▼ button or
POINT UP/DOWN button(s) .