Coleman 5080A751 - Manual (Page 7)

ENGLISH
7
Continued
WARNING
Fully close burner valve before lighting pilot. If not, severe burns can occur.
3. Open valve on propane tank(s) slowly.
4. Push and hold automatic valve button. Push ignitor (red) button. You may need to push the
ignitor button 3-8 times until the pilot lights. Note: Hose may be filled with air. If so, keep
automatic valve button pressed and wait 20 seconds before pressing ignitor again. When pilot
lights, keep automatic valve button pushed in. Release button after 30 seconds.
Lighting Pilot
OPERATION
Continued
5. If pilot light goes out, repeat step 4.
6. When pilot remains lit after releasing automatic valve button, fully open burner valve by
turning burner valve knob counterclockwise until it stops. Burner will ignite.
7. Adjust knob to heat level desired.